Vega WHA-GW-WIRELESSHART GATEWAY Bedienungsanleitung PDF herunterladen (Seite 22)

221981 2011-07

WHA-GW-*

Installation

3.2 Mounting the Gateway

The mounting location should be well accessible for mounting and electrical installation.

Make sure that there is enough space to open the housing cover and to access the

terminals, switches, and cable glands. Choose a mounting location that meets the

requirements of the climatic limits specified in the technical data.

The housing has a degree of protection of IP65 and is designed for wall mounting

(mounting accessories and tools not included).

Required tools

• 2 screws (M6)

• Drill

•Screwdriver

Depending on the mounting surface, you may need additional mounting material.

Danger!

Electrostatic discharge hazard

The device contains non-conductive plastic parts. Care must be taken when operating the

installed device because of possible electrostatic charges. Electrostatic charged surfaces

may cause an ignition spark.

Electrostatic charges must be avoided. For example, do not rub the device and never clean

plastic surfaces with a dry cloth. Always use a damp cloth instead.

Danger!

Check cable glands

The IP degree of protection can not be ensured if the cables and cable glands are not fitted

correctly.

To ensure the IP degree of protection

• all screws of the housing / housing cover must have been tightened with the appropriate

torque,

• only cables of the appropriate size must be used in the cable glands,

• all cable glands must be tightened with the appropriate torque,

• all seals must be undamaged and fitted correctly,

• all empty cable glands must be sealed with appropriate plugs.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 95 96

Keine Kommentare

Vega WHA-GW-WIRELESSHART GATEWAY Bedienungsanleitung Seite 22