Vega WHA-GW-WIRELESSHART GATEWAY Bedienungsanleitung Seite 53

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 96
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 52
WHA-GW-*
Configuration
221981 2011-07
53
Wireless Communication Parameters - Instrument List
Network Explorer Instrument List
Parameter Description Default
Max. Card
Number
Displays maximum number of cards in the I/O system. This
corresponds to the maximum number of wireless devices
which can be connected to the Gateway.
Max. Channel
Number
Displays maximum number of channels. The Gateway
always returns the value "2".
Max. Sub. Dev.
Number
Displays maximum number of sub devices that can be
connected to a specific Wireless HART adapter.
Number of Sub
Devices
Displays current number of sub devices. Every device
counts as a sub device, no matter if it is a wireless device
or a wired device connected to a WirelessHART adapter.
Instrument List Network Explorer displaying the devices and subdevices in
the network. Select a device in the tree structure for more
details on this device (see following table).
To create a backup of the Instrument List use
Additional Functions > List Editor (see chapter 6.3.5).
Table 5.3Wireless Communication Parameters - Instrument List
Note!
Using the Network Explorer
Please refer to the section "Network Explorer Tables" for information on using the Network
Explorer (see chapter 5.6).
Displayed
information
Description
Delete The Delete button becomes active when you select a device which is
currently disconnected from the wireless network (red status icon).
Press Delete to remove the selected device from the Instrument List
permanently. The respective I/O card becomes vacant again.
It is not possible to delete a connected device (green status icon)
from the Instrument List.
Refresh Press Refresh to update the Instrument List. The Instrument List is
rebuilt and reconciled with the Network Manager list.
Long Tag Long Tag of the device.
HART 5 devices and older devices do not support long tags. For
those devices, the WirelessHART adapter uses the content of the
"Message" field which will be displayed here instead.
I/O Card Virtual I/O card number to which the device is mapped to (see
chapter 2.2.3).
Channel Channel of the virtual I/O card the device is mapped to (see chapter
2.2.3).
The value "0" identifies a WirelessHART device or a WirelessHART
adapter, while the value "1" identifies a wired device connected to a
WirelessHART adapter.
Device Type Device type as registered at the HCF.
Seitenansicht 52
1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 95 96

Kommentare zu diesen Handbüchern

Keine Kommentare