Vega WHA-GW-WIRELESSHART GATEWAY Bedienungsanleitung PDF herunterladen (Seite 76)

221981 2011-07

WHA-GW-*

Operation

6.3.3 Set DTM address

The table in the Set DTM address window shows the WirelessHART devices configured in

the PACTware project and their DTM addresses. The DTM address is the device long tag

as specified in the device's DTM (offline data record). The DTM address is also displayed in

the project tree structure of the PACTware project.

Figure 6.10Additional Functions > Set DTM address

Changing the DTM address

1. Place the cursor inside a cell of the Long Tag column.

2. Change the device long tag as required. You may change the long tags of several

devices at once, if needed.

3. Close the DTM dialogs of the devices whose long tags are to be changed.

4. To apply the new DTM address(es) press Update changed tags.

The new DTM addresses are displayed in the project view of PACTware.

Note!

The Device Long Tag parameterized in the Set DTM Address window must be identical

with the Device Long Tag of the same device parameterized in the Set Device Address

window (see chapter 6.3.4). Otherwise the DTM is not able to establish a connection to the

device.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 95 96

Keine Kommentare

Vega WHA-GW-WIRELESSHART GATEWAY Bedienungsanleitung Seite 76