Vega VEGABAR 81 4 … 20 mA_HART - Quick setup guide Bedienungsanleitung PDF herunterladen (Seite 12)

5 Set up with the display and adjustment module

VEGABAR 81 • 4 … 20 mA/HART

46299-EN-131125

5 Set up with the display and adjustment

module

5.1 Insert display and adjustment module

The display and adjustment module can be inserted into the sensor

and removed any time. Four positions displaced by 90° can be se-

lected. It is not necessary to interrupt the power supply.

Proceed as follows:

1. Unscrew the housing cover

2. Place the display and adjustment module in the requested posi-

tion onto the electronics and turn to the right until it snaps in

3. Screw housing cover with inspection window tightly back on

Removal is carried out in reverse order.

Thedisplayandadjustmentmoduleispoweredbythesensor,anad-

ditional connection is not necessary.

Fig. 7: Installing the display and adjustment module in the electronics compart-

ment of the single chamber housing

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

Vega VEGABAR 81 4 … 20 mA_HART - Quick setup guide Bedienungsanleitung Seite 12