Vega MoRoS Modem - ISDN 1.3 Bedienungsanleitung PDF herunterladen (Seite 28)

Initial Operation MoRoS Modem - ISDN 1.3



Do not use the address 192.168.1.1. This is the IP address of the MoRoS

Modem - ISDN 1.3, set as factory default. For example, use 192.168.1.2 as IP

address for the network card in your PC.

2. Open an Internet browser and point it to the URL "http://192.168.1.1".



The web browser will load the start page of the MoRoS Modem - ISDN 1.3.

 If you see the message in your browser window that the page with this ad-

dress cannot be found, follow the following steps: Check if your MoRoS Mo-

dem - ISDN 1.3 receives power. If yes, most probably the wrong IP address is

set in the MoRoS Modem - ISDN 1.3. In this case, reset your device to the fac-

tory defaults by pressing the reset key three times for a short time and repeat

step 2.



A dialogue will prompt you to enter a user name and password for authen-

tification.

3. Enter the user name "insys" and the password "moros".



This user name and password are set to factory defaults. If the registration

at the web interface does not work with the data entered, reset your Mo-

RoS Modem - ISDN 1.3 to the factory defaults:

Press the reset key at the MoRoS Modem - ISDN 1.3 three times within two

seconds and repeat this instruction from step 2.



You should now see the start page of the web interface.



The MoRoS Modem - ISDN 1.3 is successfully installed and ready for con-

figuration.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 85 86

Keine Kommentare

Vega MoRoS Modem - ISDN 1.3 Bedienungsanleitung Seite 28