Vega Phoenix PSI Data Fax Modem Bedienungsanleitung PDF herunterladen (Seite 40)

PSI-DATA/FAX-MODEM/RS232

3-8 692302

Switch 4 is only used in the event of an emergency. If automatic baud rate

detection has been switched off and the device has been configured to a fixed baud

rate without echo and without confirmation, it is very difficult to detect this baud rate

setting.

• In this case, set switch 4 to "ON" and briefly disconnect the supply voltage. The

modem now starts with a fixed defined setting: 19200 bps, 8 data bits, odd

parity, 1 stop bit.

In normal operation this switch is set to "OFF", i.e., the device starts with the

last saved settings.

3.3 Electrical Connections

Table 3-1 DIP switch assignment

Mode DIP Switch

DIAL-UP OFF

LEASED LINE ON

DEVICE SETTINGS OFF

7200 BPS ON

ANSWER (ANS) OFF

ORIGINATE (ORG) ON

DEVICE SETTINGS OFF

19200 BPS; 8 DATA; ODD; 1 STOP ON

Electrical connection

Only qualified personnel may electrically connect, start up, and operate this

device. According to the safety instructions in this text, qualified personnel are

persons who are authorized to start up, to ground, and to mark devices, systems,

and equipment according to the standards of safety technology. In addition, these

persons must be familiar with all warning instructions and maintenance measures

in this text.

Disregarding this warning may result in damage to equipment and/or serious

personal injury.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 127 128

Keine Kommentare

Vega Phoenix PSI Data Fax Modem Bedienungsanleitung Seite 40