Vega PLICSRADIO R62 Wireless receiving unit Bedienungsanleitung PDF herunterladen (Seite 15)

5 Connecting to power supply

PLICSRADIO R62 • Wireless receiving unit (multiple channel)

32970-EN-130228

Fig. 7: Removing the mounting plate on the housing socket

1 Hexagon screws

2 Wall mounting plate

3 Cable gland

3. Loop the connection cable through the cable entry on the housing

base

Tip:

Take note when inserting the cable that after connection, the housing

must be turned again by 180° to screw it securely to the mounting

plate,i.e.bringtheinstrumentintoitsthenalposition.

4. Connect the wire ends as described in chapter "Connection plan".

Take note of the polarity.

5. Connect the screen to the internal ground terminal, connect the

outer ground terminal above on the housing to potential equalisa-

tion

6. Tighten the compression nut of the cable entry. The seal ring must

completely encircle the cable

7. Attach the mounting plate again and tighten the screws

5.3 Connection steps voltage supply

Proceed as follows:

1. Unscrew the housing cover

2. If a display and adjustment module is installed, remove it by turn-

ing it slightly to the left.

3. Removetheterminalcoverbylooseningthexingscrew

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

Keine Kommentare

Vega PLICSRADIO R62 Wireless receiving unit Bedienungsanleitung Seite 15