Vega PLICSRADIO T62 Wireless emitting unit Bedienungsanleitung Seite 23

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 44
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 22
23
6 Setup with the integrated display and adjustment unit
PLICSRADIO T62 • Wireless emitting unit (multiple channel)
32624-EN-130228
The emitting and receiving units must be always set to the same radio
channel. When using several independent radio links, each radio link
mustbeprovidedwithadierentchannel.Intotal,sevenradiolinks
are available (channel 0 … 6).
→
Enter the values via the appropriate keys and save your settings
with [OK].
A instrument address must be assigned to each sensor so that
emitter and receiver can communicate. This address must only be
availabe once per radio channel. Enter an individual address between
1 and 6.
Note:
During operation, the addressing of the individual instruments is no
longer carried out via the device address but via the serial number.
After a change of the device address, the inputs in R61 and C62 must
be reassigned (restart device search).
→
Enter the values via the appropriate keys and save your settings
with [OK].
To protecttheradioconnectionagainstunauthorizedwiretapping,the
transmission should be protected by a radio PIN. To do that, activate
this function and enter any PIN (0001-9999).
→
Enter the values via the appropriate keys and save your settings
with [OK].
The displayed value determines which measured values are dis-
played. For VEGA sensors "Percent", "lin. percent", "Scaled" and
"Sensor value" are available. The parameterisation of the connected
sensor is based on the settings "Percent", "lin. percent" and "Scaled".
Enter the values via the appropriate keys and save your settings with
[OK].
When the instrument displays a failure message, further information is
available under the menu item "Diagnosis - Device status".
Devicesettings-Radio
channel
Devicesettings-Address
Devicesettings-Safe
operating mode
Display-Displayedvalue
Diagnostics
Seitenansicht 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare