Fig. 5: Loosen the plug
insert
1 Plug insert
2 Strain relief
3 Cable gland
4 Plug housing
5 Remove approx. 5 cm of the cable mantle, strip approx. 1 cm
insulation from the individual wires
6 Lead the cable through the cable gland into the plug housing
7 Connect the wire ends to the screw terminals according to the
wiring plan
Fig. 6: Connection to the
screw terminals
1 Cable gland
2 Cover
3 Plug housing
4 Plug insert
5 Plug seal
8 Snap the plug insert into the plug housing and insert the sensor
seal
14 VEGABAR 14
5 Connecting to power supply
22441-EN-111006
Kommentare zu diesen Handbüchern