Vega VEGABAR 51 Foundation Fieldbus Bedienungsanleitung PDF herunterladen (Seite 57)

10 Anhang

VEGABAR 51 • Foundation Fieldbus

36715-DE-130311

– XandYvaluesfortheuserdenedlinearizationcurve

•

curve_points_11_20

– XandYvaluesfortheuserdenedlinearizationcurve

•

curve_points_21_30

– XandYvaluesfortheuserdenedlinearizationcurve

•

curve_points_31_33

– XandYvaluesfortheuserdenedlinearizationcurve

•

curve status

– Result of table plausibility check

– "0:""Uninitialized""1:""Good""2:""Notmonotonousincreasing""3:""Notmonotonousdecre-

asing""4:""Notenoughvaluestransmitted""5:""Toomanyvaluestransmitted""6:""Gradient

ofedgetoohigh""7:""Valuesnotexcepted""8:""Tablecurrentlyloaded""9:""Sortingand

checkingtable"""

•

SUB_DEVICE_NUMBER

•

SENSOR_ELEMENT_TYPE

– 0:"non-specic"

•

display_source_selector

– Selects the type of value that is displayed on the indication-/adjustement-module

– "0:""Physicalvalue""1:""Percentvalue""2:""Linpercentvalue""6:""Out(AI1)""7:""Level""

8:""Out(AI2)""9:""Out(AI3)"""

•

max_peak_sensor_value

– Holds the maximum sensor value. Write access resets to current value. Unit derives from

'Sensor_range.unit'

– Write access resets to current value

•

min_peak_sensor_value

– Holds the minimum sensor value. Write access resets to current value. Unit derives from 'Sen-

sor_range.unit'

– Write access resets to current value

•

CAL_POINT_HI

– Highest calibrated value. For calibration of the high limit point you give the high measurement

value (pressure) to the sensor and transfer this point as HIGH to the transmitter. Unit derives

from 'Sensor_range.unit'

•

CAL_POINT_LO

– Lowest calibrated value. For calibration of the low limit point you give the low measurement

value (pressure) to the sensor and transfer this point as LOW to the transmitter. Unit derives

from 'Sensor_range.unit'

•

CAL_MIN_SPAN

– Minimum calibration span value allowed. Necessary to ensure that when calibration is done,

the two calibrated points (high and low) are not too close together. Unit derives from 'Sen-

sor_range.unit'

•

SCALE_IN

– Min/max-adjustment: Upper and lower calibrated points of the sensor. Unit derives from 'Sen-

sor_range.unit'

•

trimmed_value

– Sensor value after the trim processing. Unit derives from 'Sensor_range.unit'

•

sensor_sn

– Sensor serial number

•

temperature

– Process temperature. Selected as input to AIFB by setting 'Channel' = 4. Unit derives from

'Temperature.unit'

•

temperature_unit

– Unit code of 'Temperature', 'Max/Min_peak_temperature_value'

– °C, °F, K, °R

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 71 72

Kommentare zu diesen Handbüchern

Keine Kommentare

Vega VEGABAR 51 Foundation Fieldbus Bedienungsanleitung Seite 57

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Vega VEGABAR 51 Foundation Fieldbus