Vega VEGABAR 52 Profibus PA - climate compensated Bedienungsanleitung PDF herunterladen (Seite 44)

8 Maintenance and fault rectication

VEGABAR 52 • Probus PA - climate compensated

36788-EN-130321

The serial number is stated on the type label of VEGABAR 52 or on

the delivery note.

8.5 Software update

The software version of VEGABAR 52 can be determined as follows:

•

on the type label of the electronics

•

Via the display and adjustment module

•

via PACTware

You can view all software histories on our website www.vega.com.

Make use of this advantage and get registered for update information

via e-mail.

The following components are required to update the sensor soft-

ware:

•

Sensor

•

Voltage supply

•

VEGACONNECT

•

PC with PACTware

•

Current sensor software as le

At "www.vega.com/downloads" go to "Software". Select under "plics

sensors and instruments", "Firmware updates" the respective instru-

ment series and software version. Load the zip le via the right mouse

key with "Save target as" e.g. on the desktop of your PC. Move with

the right mouse key to the folder and select "Extract all". Save the

extracted les, for example on the desktop.

Connect the signal conditioning instrument to power supply and

provide the connection from the PC to the instrument via the interface

adapter. Start PACTware and go via the menu "Project" to the VEGA

project assistant. Select "USB" and "Set instruments online". Activate

the project assistant with "Start". The assistant establishes the con-

nection automatically and opens the parameter adjustment window

"Sensor # online parameter adjustment". Connect this parameter

adjustment window before you carry out further steps.

Select with the right mouse key the sensor in the project and go to

"Additional function". Then click to "Software update". The window

"Sensor # software update" opens. PACTware checks now the sensor

data and displays the actual hardware and software version of the

sensor. This takes approximately 60 s.

Push the button "Update software" and select the previously extracted

hex le. Then the software update can be started. The additional les

are installed automatically. Depending on the sensor, this procedure

lasts up to 1 h. Then the message appears ""Software update suc-

cessfully executed".

8.6 Instrument repair

If a repair is necessary, please proceed as follows:

Load sensor software

to PC

Prepar

e update

Load software into sen-

sor

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 75 76

Kommentare zu diesen Handbüchern

Keine Kommentare

Vega VEGABAR 52 Profibus PA - climate compensated Bedienungsanleitung Seite 44

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Vega VEGABAR 52 Profibus PA - climate compensated