Vega VEGABAR 63 4 … 20 mA_HART Bedienungsanleitung PDF herunterladen (Seite 34)

6.4 Setup

procedure

In HART-Multidrop mode (several sensors on one input) the address

must be set before continuing with the parameter adjustment. You will

ﬁnd a detailed description in the operating instructions manual

"Indicating and adjustment module" or in the online help of PACTware

or DTM.

HART mode

Standard

Address 0

VEGABAR 63 can be used for level as well as for process pressure

measurement. Default setting is level measurement. The mode can be

changed in the adjustment menu.

Depending on the application only the respective subchapter "Level or

process pressure measurement" is of importance. There, you ﬁnd the

individual adjustment steps.

Level measurement

Set up VEGABAR 63 in the following sequence:

1 Selecting adjustment unit/density unit

2 Carry out position correction

3 Carrying out min. adjustment

4 Carrying out max. adjustment

In the menu item "Adjustment unit" you select the physical unit in which

the adjustment should be carried out, e.g. mbar, bar, psi…

The position correction compensates the inﬂuence of the mounting

position or static pressure on the measurement. It does not inﬂuence

the adjustment values.

Informa

tion:

The steps 1, 3 and 4 are not necessary for instruments which are

already preset according to customer speciﬁcations!

You can ﬁnd the data on the type label on the instrument or in the

menu items of the min./max. adjustment.

The indicating and adjustment module enables the adjustmetn without

ﬁlling or pressure. Thanks to this, you can carry out your settings

already in the factory without the instrument having to be installed.

The actual measured value is also displayed in the menu items for

min./max. adjustment.

In this menu item you select the adjustment unit as well as the unit for

the temperature indication in the display.

Address setting HART-

Multidrop

Level or process pres-

sure measurement

Parameter ad-

justment "Level

measurement"

Select unit

34 VE

GABAR 63 • 4 … 20 mA/HART

6 Set

up with the indicating and adjustment module PLICSCOM

32462-EN-081209

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 75 76

Kommentare zu diesen Handbüchern

Keine Kommentare

Vega VEGABAR 63 4 … 20 mA_HART Bedienungsanleitung Seite 34

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Vega VEGABAR 63 4 … 20 mA_HART