Vega VEGABAR 81 4 … 20 mA - Quick setup guide Bedienungsanleitung PDF herunterladen (Seite 10)

5 Set up with the display and adjustment module

VEGABAR 81 • 4 … 20 mA

46298-EN-131125

5 Set up with the display and adjustment

module

5.1 Insert display and adjustment module

The display and adjustment module can be inserted into the sensor

and removed any time. Four positions displaced by 90° can be se-

lected. It is not necessary to interrupt the power supply.

Proceed as follows:

1. Unscrew the housing cover

2. Place the display and adjustment module in the requested posi-

tion onto the electronics and turn to the right until it snaps in

3. Screw housing cover with inspection window tightly back on

Removal is carried out in reverse order.

Thedisplayandadjustmentmoduleispoweredbythesensor,anad-

ditional connection is not necessary.

Fig. 5: Installing the display and adjustment module in the electronics compart-

ment of the single chamber housing

Note:

Ifyouintendtoretrottheinstrumentwithadisplayandadjustment

moduleforcontinuousmeasuredvalueindication,ahighercoverwith

an inspection glass is required.

5.2 Parameter adjustment - Quick setup

Toquicklyandeasilyadaptthesensortotheapplication,select

the menu item "Quick setup" in the start graphic on the display and

adjustment module.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

Vega VEGABAR 81 4 … 20 mA - Quick setup guide Bedienungsanleitung Seite 10