Vega PLICSMOBILE GSM_GPRS radio module Bedienungsanleitung PDF herunterladen (Seite 15)

energy saving mode is activated, this block rounding is applied with

each transmission. If for example a tariﬀ with a block rounding to

100 KB is used, then an hourly measured value transmission causes a

monthly billing volume of more than 70 MB. Select therefore a pure

data tariﬀ (M2M) with a possibly low block rounding.

Insert the card with the beveled side in front into the card slot until it

snaps in. The contact surface must point downward.

Note:

The electronics must be voltage-free when inserting the SIM card. To

ensure this, the entire voltage supply must be switched oﬀ. This

includes disconnecting a battery and USB cable that might be

installed. Take ESD protective measures when handling the SIM card.

Electrostatic discharges can damage the SIM card or the PLICS-

MOBILE.

Fig. 6: Insert SIM card

To avoid misuse, the SIM card is generally locked by a PIN. To

ensure that PLICSMOBILE can contact these locked SIM cards, ﬁrst of

all the PIN must be entered. For this purpose the assistant "Activate

SIM card" is available in the DTM. Enter here the correct PIN for the

card. The assistant also oﬀers the option of changing the PIN.

Then check if the card is logged into the network and if suﬃcient

network coverage (signal strength) exists. This can be checked in the

Insert SIM card

Activate SIM card

PLICSMOBILE • GSM/GPRS radio module 15

5 Set up

36849-EN-111221

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Keine Kommentare

Vega PLICSMOBILE GSM_GPRS radio module Bedienungsanleitung Seite 15