30
8Maintenanceandfaultrectication
PLICSRADIO C62 • Wireless processing unit for PLICSRADIO T62
32627-EN-130701
Error code Cause Rectication
E003 CRC error (error with
self-check)
– Carry out a reset
– Send instrument for repair
E008 PLICSRADIO T61/
T62/R62 not found
– Check connection of T61/T62/R62
– Check address of PLICSRADIO T61/
T62
– Check radio parameters and signal
strength
– R62 still in boot phase
E013 PLICSRADIO T61/
T62 signals failure,
no valid measured
value
– Check connection of the sensor
– Check sensor parameter adjustment
– Send sensor for repair
E030 Sensor in boot phase
Measured value not
valid
– Check sensor parameter adjustment
E034 EEPROM CRC error – Switchtheinstrumentoandon
– Carry out a reset
– Send instrument for repair
E035 ROM CRC error – Switchtheinstrumentoandon
– Carry out a reset
– Send instrument for repair
E036 Instrument software
not executable (dur-
ing software update
or after failed update)
– Waituntilsoftwareupdateisnished
– Carry out another software update
E053 Sensor measuring
range not read cor-
rectly
– Communication error: Check sensor
cable and screening
Depending on the reason for the fault and the measures taken, the
stepsdescribedinchapter"Set up"mayhavetobecarriedoutagain.
8.3 Instrument repair
If a repair is necessary, please proceed as follows:
You can download a return form (23 KB) from our Internet homepage
www.vega.comunder:"Downloads-Formsandcerticates-Repair
form".
By doing this you help us carry out the repair quickly and without hav-
ing to call back for needed information.
•
Printandlloutoneformperinstrument
•
Clean the instrument and pack it damage-proof
•
Attach the completed form and, if need be, also a safety data
sheet outside on the packaging
•
Please ask the agency serving you for the address of your return
shipment.Youcanndtherespectivecontactdataonourwebsite
www.vega.comunder:"Company - VEGA worldwide"
Reaction after fault recti-
cation
Kommentare zu diesen Handbüchern