Vega PLICSRADIO T61 Wireless emitting unit Bedienungsanleitung Seite 10

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 40
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 9
10
3 Product description
PLICSRADIO T61 • Wireless emitting unit (single channel)
32865-EN-130322
Twotypesofpowersupplyunitareavailable.Youcannddetailed
informationonthepowersupplyinchapter"Technical data"inthe
"Supplement".
3.3 Operation
The instrument can be adjusted with the following adjustment media:
With the display and adjustment module
with an adjustment software according to FDT/DTM standard, for
example with PACTware and a VEGACONNECT 4 or the PLICS-
RADIO C62 processing unit
The entered parameters are generally saved in PLICSRADIO T61,
when used with PACTware and PC also optionally in the PC.
Information:
When using PACTware and corresponding VEGA DTMs, additional
settings can be carried out which are not possible or only partly pos-
sible with the integrated display and adjustment unit. When using an
adjustment software, you need the interface converter VEGACON-
NECT 4.
3.4 Packaging, transport and storage
Your instrument was protected by packaging during transport. Its
capacity to handle normal loads during transport is assured by a test
based on ISO 4180.
The packaging of standard instruments consists of environment-
friendly, recyclable cardboard. For special versions, PE foam or PE
foil is also used. Dispose of the packaging material via specialised
recycling companies.
Transport must be carried out under consideration of the notes on the
transport packaging. Nonobservance of these instructions can cause
damage to the device.
The delivery must be checked for completeness and possible transit
damage immediately at receipt. Ascertained transit damage or con-
cealed defects must be appropriately dealt with.
Up to the time of installation, the packages must be left closed and
stored according to the orientation and storage markings on the
outside.
Unless otherwise indicated, the packages must be stored only under
the following conditions:
Not in the open
Dry and dust free
Not exposed to corrosive media
Protected against solar radiation
Avoiding mechanical shock and vibration
Storageandtransporttemperatureseechapter"Supplement -
Technical data - Ambient conditions"
Relative humidity 20 … 85 %
Voltage supply
Packaging
Transport
Transport inspection
Storage
Storage and transport
temperature
Seitenansicht 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare