Vega POINTRAC 31 Profibus PA Bedienungsanleitung PDF herunterladen (Seite 34)

6 Set up with the display and adjustment module

POINTRAC 31 • Probus PA

43835-EN-131119

Menu Menu item Default value

Setup Sensor address 126

Measurement loop name Sensor

Isotope Cs-137

Application Limit level

Background radiation 0 ct/s

Temperature unit ° C

Adjustment mode 1-point

Adjustment (uncovered) 90000 ct/s

Delta I 90 %

AI FB1 Channel Process value

AI FB1 scaling unit %

AI FB1 scaling 0 % = 0 %

100 % = 100 %

AI FB1 damping 0 s

Mode relay Dry run protection

Block adjustment Released

Display Language Selected language

Displayed value Pulse rate (ct/s)

With this function you can select the mode.

The sensor oers the HART modes standard and multidrop.

If the measured value is outputted via the 4 … 20 mA output, you

must not switch over to HART Multidrop.

The mode 'Standard', with xed address 0 (factory setting), means

output of the measured value as 8/16 mA signal.

This parameter is described in the operating instructions manual

"Display and adjustment module".

With this function

•

Load parameter adjustment data from the sensor into the display

and adjustment module

•

Write parameter adjustment data from the display and adjustment

module into the sensor

This parameter is described in the operating instructions manual

"Display and adjustment module".

Info

In this menu you will nd the following menu items:

•

Instrument name - shows instrument name and serial number

•

Instrument version - shows hardware and software version of the

instrument

Additional adjustments -

HART mode

Additional adjustments -

Copy instrument settings

Info

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 63 64

Kommentare zu diesen Handbüchern

Keine Kommentare

Vega POINTRAC 31 Profibus PA Bedienungsanleitung Seite 34

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Vega POINTRAC 31 Profibus PA