Vega VEGABAR 40 HART Bedienungsanleitung PDF herunterladen (Seite 24)

24 VEGABAR 40 (HART

®

)

Setup

Sensor parameter adjustment –

Adjustment

Click to Instrument data, then to Parameter

adjustment.

In the window "Configuration Measurement

loop Modify“, you can assign a name and a

description to the measurement loop. An

unambiguous name is important when you

adjust several sensors or measurement

loops with VVO. State under "Application“ if

you want to have a process pressure or level

measurement. With OK you again reach the

window "VEGA Visual Operating“. In the

following explanations, we assume that you

have chosen the application "Process pres-

sure measurement“. With the application

"Level measurement“ the adjustment deviates

slightly from the following demonstration.

Confirm this message with OK. Then the

window "Instrument data parameter adjust-

ment“ appears.

From the window "Instrument data parameter

adjustment“ you reach all submenus of the

sensor. We recommend trying the individual

buttons one after the other. Then you always

reach this window. Click to the button Adjust-

ment to carry out the adjustment.

After this, several HART

®

sensors can be

connected to one common cable. The further

adjustments of VEGABAR in Multidrop opera-

tion (e.g. adjustment, measured value dis-

play) do not differ from the adjustments in

standard operation.

Configuration measurement loop

Click to Configuration, point to Measure-

ment loop, then click to Modify.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare