Vega VEGABAR 55 Profibus PA - climate compensated Bedienungsanleitung PDF herunterladen (Seite 10)

3 Product description

VEGABAR 55 • Probus PA - climate compensated

39442-EN-130321

3.3 Operation

The instrument can be adjusted with the following adjustment media:

•

With the display and adjustment module

•

with the suitable VEGA DTM in conjunction with an adjustment

software according to the FDT/DTM standard, e.g. PACTware and

•

with the adjustment program PDM

3.4 Packaging, transport and storage

Your instrument was protected by packaging during transport. Its

capacity to handle normal loads during transport is assured by a test

based on ISO 4180.

The packaging of standard instruments consists of environment-

friendly, recyclable cardboard. For special versions, PE foam or PE

foil is also used. Dispose of the packaging material via specialised

recycling companies.

Transport must be carried out under consideration of the notes on the

transport packaging. Nonobservance of these instructions can cause

damage to the device.

The delivery must be checked for completeness and possible transit

damage immediately at receipt. Ascertained transit damage or con-

cealed defects must be appropriately dealt with.

Up to the time of installation, the packages must be left closed and

stored according to the orientation and storage markings on the

outside.

Unless otherwise indicated, the packages must be stored only under

the following conditions:

•

Not in the open

•

Dry and dust free

•

Not exposed to corrosive media

•

Protected against solar radiation

•

Avoiding mechanical shock and vibration

•

Storage and transport temperature see chapter "Supplement -

Technical data - Ambient conditions"

•

Relative humidity 20 … 85 %

3.5 Accessories and replacement parts

The display and adjustment module PLICSCOM is used for measured

value indication, adjustment and diagnosis. It can be inserted into the

sensor and removed at any time.

You can nd further information in the operating instructions "Display

and adjustment module PLICSCOM" (Document-ID 27835).

The interface adapter VEGACONNECT 4 enables the connection of

communication-capable instruments to the USB interface of a PC. For

Packaging

ansport

Transport inspection

Storage

Storage and transport

temperature

Display and adjustment

module

Interface adapter

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 67 68

Kommentare zu diesen Handbüchern

Keine Kommentare

Vega VEGABAR 55 Profibus PA - climate compensated Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Vega VEGABAR 55 Profibus PA - climate compensated