Vega VEGABAR 63 4 … 20 mA_HART Bedienungsanleitung PDF herunterladen (Seite 52)

8.3 Exch

anging the electronics module

In case of a defect, the electronics module can be exchanged by the

user against an identical type. If no electronics module is available on

side, the module can be ordered for the VEGA agency serving you.

Ordering and exchange are possible with or without sensor serial

number. The electronics module with serial number includes order-

speciﬁc data such as factory setting, seal material etc. These are not

included in the electronics module without serial number.

The serial number is stated on the type label of VEGABAR 63 or on the

delivery note.

8.4 Software update

The following components are required to update the sensor software:

l Sensor

l Power supply

l VEGACONNECT

l PC with PACTware

l Current sensor software as ﬁle

At "

www.vega.co

m/downloads" go to "Software". Select under "plics

instruments and sensors" the suitable instrument series. Load the zip

ﬁle via the right mouse key with "Save target as" e.g. on the desktop of

your PC. Extract all ﬁles available in the zip ﬁle, e.g. to the desktop.

Connect the sensor to power supply and provide connection from PC

to the instrument via VEGACONNECT. Start PACTware and provide

connection to the sensor, e.g. via the VEGA project assistant. Close

the parameter window of the sensor, as far as open.

Go in the PACTware menu bar to "Instrument data", "Additional

functions" and "Update instrument software".

PACTware checks now the actual hardware and software version of

the sensor and displays the data. This procedure lasts approx. 60 s.

Push the button " Update software" and select the previously

extracted hex ﬁle. Then the software update can be started. Further

ﬁles are installed automatically. Depending on the sensor, this

procedure lasts approximately 1 h.

8.5 Instrument repair

If a repair is necessary, please proceed as follows:

You can download a return form (23 KB) from our Internet homepage

www.vega.com

under: "Downloads - Forms and certiﬁcates - Repair

form".

By doing this you help us carry out the repair quickly and without

having to call back for needed information.

Load sensor software to

Prepare update

Load software into sen-

sor

52 VE

GABAR 63 • 4 … 20 mA/HART

8 M

aintenance and fault rectiﬁcation

32462-EN-081209

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 75 76

Kommentare zu diesen Handbüchern

Keine Kommentare

Vega VEGABAR 63 4 … 20 mA_HART Bedienungsanleitung Seite 52

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Vega VEGABAR 63 4 … 20 mA_HART