Vega INSYS Modem GPRS 5.0 Bedienungsanleitung PDF herunterladen (Seite 29)

INSYS GPRS 5.0 serial Mounting

4.6 Operating Modes

4.6.1 Command Mode

4.6.1.1 Offline

The offline command mode is the state after the GSM/GPRS

engine was booted and initialized, or after a reset of the

{{{PRODUCT DESCRIPTION}}} . During the offline command

mode the {{{PRODUCT DESCRIPTION}}} can be addressed via AT

commands.

Note

Please note that in the operating mode "TCP List" not all AT com-

mands may be used. See Chapters 5.2.7 and 7.

4.6.1.2 Online

The {{{PRODUCT DESCRIPTION}}} can be switched to online

command mode during a data connection (CSD, GPRS, “TCP

transparent”).

After switching from data mode to online command mode, the

connection will remain established, but no data is transmitted to

the remote terminal. The online command mode is also entered by

DTR drop (setting AT&D1) or by activating the reset input twice

within 10 seconds.

Note: Terminating connections, see Chapters 5.2.9

- Connection termination - and 5.2.9– GPRS Connection termination -

4.6.1.3 Remote

Note: See Chapter 6.8 "Remote Configuration"

4.6.1.4 SMS configuration

Note: See Chapter 6.5 "Automatic SMS Processing"

4.6.2 Connection mode

Depending on the connection type, the data is transformed unaltered

from and to the application (CSD call, GPRS call) or processed by inte-

grated TCP/IP stacks of the

controller (TCP transparent).

<1 Sek.

Pause>

+++

<1 Sek. Pause>

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 112 113

Keine Kommentare

Vega INSYS Modem GPRS 5.0 Bedienungsanleitung Seite 29