Vega VEGABAR 54 4 … 20 mA_HART Bedienungsanleitung PDF herunterladen (Seite 34)

6 Set up with the display and adjustment module PLICSCOM

VEGABAR 54 • 4 … 20 mA/HART

36726-EN-130321

Information:

Thezeroadjustmentshiftsthevalueofthespanadjustment.The

span,i.e.thedierencebetweenthesevalues,however,remains

unchanged.

Information:

For an adjustment with pressure, simply enter the actual measured

value indicated at the bottom of the display.

Iftheadjustmentrangesareexceeded,themessage"Outside param-

eter limits"appears.Theeditingprocedurecanbeabortedwith[ESC]

or the displayed limit value can be accepted with [OK].

Proceed as follows:

1. Editthembarvalueinthemenuitem"span"with[OK].

Span

100.0 %

+1000.0 mbar

0000.0 mbar

Information:

The displayed pressure for 100 % corresponds to the nominal meas-

uring range of the sensor (in the above example 1 bar = 1000 mbar).

2. Set the requested mbar value with [->] and [OK].

3. Conrmwith[OK] and move to the menu overview with [ESC].

Thespanadjustmentisnished.

Information:

For an adjustment with pressure, simply enter the actual measured

value indicated at the bottom of the display.

Iftheadjustmentrangesareexceeded,themessage"Outside param-

eter limits"appears.Theeditingprocedurecanbeabortedwith[ESC]

or the displayed limit value can be accepted with [OK].

This function enables reading out parameter adjustment data as well

as writing parameter adjustment data into the sensor via the display

and adjustment module. A description of the function is available in

theoperatinginstructionsmanual"Display and adjustment module".

The following data are read out or written with this function:

•

Measured value presentation

•

Adjustment

•

Damping

•

Linearizationcurve

•

Sensor-TAG

•

Displayed value

•

Display unit

•

Scaling

•

Current output

•

Unitofmeasurement

•

Language

The following safety-relevant data are not read out or written:

Carry out span adjust-

ment

Copy sensor data

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 71 72

Kommentare zu diesen Handbüchern

Keine Kommentare

Vega VEGABAR 54 4 … 20 mA_HART Bedienungsanleitung Seite 34

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Vega VEGABAR 54 4 … 20 mA_HART