Vega VEGABAR 61 Profibus PA Bedienungsanleitung Seite 49

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 84
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 48
? Wrong presen
tation of the measured value in Simatic S5
l Simatic S5 cannot interpret the number format IEEE of the
measured value
à Insert converting component from Siemens
? In Simatic S7 the measured value is always presented as 0
l Only four bytes are consistently loaded in t he PLC
à Use function component SFC 14 to load 5 bytes consistently
? Measured value on the indicating and adjustment module does not
correspond to the value in the PLC
l The menu item "Display - Display value" is not set to " PA-Out"
à Check values and correct, if necessary
? No connection between PLC and PA network
l Incorrect adjustment of the bus parameter and the segment
coupler-dependent baud rate
à Check data and correct, if necessary
? Instrument does not appear during connection setup
l Probus DP cable pole-reversed
à Check cable and correct, if necessary
l Incorrect termination
à Check termination at the beginning and end points of the bus
and terminate, if necessary, according to the specication
l Instrument not connected to the segment, double assignment
of an address
à Check and correct, if necessary
In Ex applications, the regu
lations for the wiring of intrinsically safe
circuits must be observed.
? E013
l no measured value available
10)
à Exchange instrument or return instrument for repair
? E017
l Adjustment span too small
à repeat with modied values
? E036
l no operable sensor software
à Carry out a software update or send the instrument for repair
10)
Fault message can also appear if the pressure is higher than the nominal
range.
Fault messages via the
indicating/adjustment
module
VEGABAR 61 Probus PA 49
8 Maintenance and fault recticati
on
28251-EN-081209
Seitenansicht 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 83 84

Kommentare zu diesen Handbüchern

Keine Kommentare