Fig. 4: Temperature ranges
1 Process temperature
2 Ambient
temperature
4.2 Mounting steps
For mounting VEGABAR 65, a welded socket is required. You can find
these components in the supplementary instructions manual "Welded
socket and seals".
Use the seal corresponding to the instrument:
- or -
Seal with a suitable resistant seal:
l Flange connection according to DIN/ANSI
à Screw VEGABAR 65 into the welded socket. Tighten the hexagon
screw on the process fitting with SW 27 (spanner width 27 mm).
Warning:
The
housing must not be used to screw the instrument in! Applying
tightening force can damage internal parts of the housing.
4.3 Mounting steps external housing
1 Mark the holes according to the following drilling template
2 Depending on the mounting surface, fasten the wall mounting
plate with 4 screws
Welding the socket
Sealing/Screwing in
Wall mounting
VEGABAR 65 • Foundation Fieldbu
s 13
4 Mounting
28260-EN-090522
Kommentare zu diesen Handbüchern