Vega VEGABAR 81 Profibus PA - Operating Instructions Bedienungsanleitung PDF herunterladen (Seite 33)

6 Set up with the display and adjustment module

VEGABAR 81 • Probus PA

45020-EN-131107

The main menu is divided into ve sections with the following func-

tions:

Setup: Settings, for example, to measurement loop name, applica-

tion, units, position correction, adjustment, AI FB 1 Channel - scaling

- damping

Display: Settings, e.g., for language, measured value display, lighting

Diagnosis: Information, e.g. on instrument status, pointer, measure-

ment reliability, AI FB 1 simulation

Additional adjustments: PIN, date/time, reset, copy function

Info: Instrument name, hardware and software version, date of manu-

facture, sensor features

In the main menu point "Setup", the individual submenu points should

be selected subsequently and provided with the correct parameters

to ensure the optimum adjustment of the measurement. The menu

items are described in the following.

An address must be assigned to each Probus PA instrument. Each

address may only be assigned once in the Probus PA network. The

sensor is only recognized by the control system if the address is set

correctly.

When the instrument is shipped, address 126 is adjusted. This ad-

dress can be used for function test of the instrument and for con-

nection to a Probus PA network. Then address must be changed to

integrate additional instruments.

The address setting is carried out either via:

•

The address selection switch in the electronics compartment of

the instrument (address setting via hardware)

•

The display and adjustment module (address setting via software)

•

PACTware/DTM (address setting via software)

The hardware addressing is eective if an address <126 is set

with the address selection switches on the electronics module of

VEGABAR 81. Software addressing thus has no eect - only the set

hardware address applies.

The software addressing is only eective if address 126 or higher is

adjusted on the instrument with the address selection switches.

Main menu

Setup - Instrument ad-

dress

Hardware addressing

Software addressing

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 83 84

Kommentare zu diesen Handbüchern

Keine Kommentare

Vega VEGABAR 81 Profibus PA - Operating Instructions Bedienungsanleitung Seite 33

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Vega VEGABAR 81 Profibus PA - Operating Instructions