Vega VEGABAR 55 Profibus PA Bedienungsanleitung PDF herunterladen (Seite 44)

8 Maintenance and fault rectication

VEGABAR 55 • Probus PA

36735-EN-130321

At "www.vega.com/downloads" go to "Software". Select under "plics

sensors and instruments", "Firmware updates" the respective instru-

ment series and software version. Load the zip le via the right mouse

key with "Save target as" e.g. on the desktop of your PC. Move with

the right mouse key to the folder and select "Extract all". Save the

extracted les, for example on the desktop.

Connect the signal conditioning instrument to power supply and

provide the connection from the PC to the instrument via the interface

adapter. Start PACTware and go via the menu "Project" to the VEGA

project assistant. Select "USB" and "Set instruments online". Activate

the project assistant with "Start". The assistant establishes the con-

nection automatically and opens the parameter adjustment window

"Sensor # online parameter adjustment". Connect this parameter

adjustment window before you carry out further steps.

Select with the right mouse key the sensor in the project and go to

"Additional function". Then click to "Software update". The window

"Sensor # software update" opens. PACTware checks now the sensor

data and displays the actual hardware and software version of the

sensor. This takes approximately 60 s.

Push the button "Update software" and select the previously extracted

hex le. Then the software update can be started. The additional les

are installed automatically. Depending on the sensor, this procedure

lasts up to 1 h. Then the message appears ""Software update suc-

cessfully executed".

8.6 Instrument repair

If a repair is necessary, please proceed as follows:

You can download a return form (23 KB) from our Internet homepage

www.vega.com under: "Downloads - Forms and certicates - Repair

form".

By doing this you help us carry out the repair quickly and without hav-

ing to call back for needed information.

•

Print and ll out one form per instrument

•

Clean the instrument and pack it damage-proof

•

Attach the completed form and, if need be, also a safety data

sheet outside on the packaging

•

Please ask the agency serving you for the address of your return

shipment. You can nd the respective contact data on our website

www.vega.com under: "Company - VEGA worldwide"

Load sensor software

to PC

Prepar

e update

Load software into sen-

sor

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 67 68

Kommentare zu diesen Handbüchern

Keine Kommentare

Vega VEGABAR 55 Profibus PA Bedienungsanleitung Seite 44

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Vega VEGABAR 55 Profibus PA