Vega VEGABAR 66 4 … 20 mA_HART Bedienungsanleitung PDF herunterladen (Seite 16)

4 Mounting

VEGABAR 66 • 4 ... 20 mA/HART

36737-EN-130321

Mount VEGABAR 66 with screwed connection as follows:

1. Weld the welded socket into the vessel top

2. Lower VEGABAR 66 to the requested height by means on the

welded socket G1½ or 1½ NPT on the vessel side

3. Insert the suspension cable from below into the open screwed

connection

4. Slide the seal cone and the cone sleeve over the suspension

cable, fasten manually with the seal screw

5. Screw the screwed connection into the socket, tighten with

SW 30 and then tighten seal screw with SW 19

How to correct the height:

1. Loosen seal screw with SW 19

2. Slide seal cone and cone sleeve to the requested position on the

cable

3. Fasten the seal screw

Removal is carried out in reverse order.

4.5 Mountingstepswithlocktting

Fig. 9: Lock tting

1 Upper hexagon

2 Fixing screw

3 Washer disk

4 Lower hexagon

5 Fixing screw

MountVEGABAR66withlockttingasfollows:

1. Weld the welded socket G1½ or 1½ NPT to the vessel top

2. Lower VEGABAR 66 through the welded socket.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 75 76

Keine Kommentare

Vega VEGABAR 66 4 … 20 mA_HART Bedienungsanleitung Seite 16