Vega VEGAPULS 66 (≥ 2.0.0 - ≥ 4.0.0) standpipe ver. Mod Bedienungsanleitung PDF herunterladen (Seite 39)

9 Diagnosis, Asset Management and service

VEGAPULS 66 standpipe version • Modbus and Levelmaster protocol

41367-EN-121011

In Ex applications only one instrument and one electronics module

with respective Ex approval may be used.

If there is no electronics module available on site, the electronics

module can be ordered through the agency serving you. The electron-

ics modules are adapted to the respective sensor and dier in signal

output or voltage supply.

The new electronics module must be loaded with the default settings

of the sensor. These are the options:

•

In the factory

•

Or on site by the user

In both cases, the serial number of the sensor is needed. The serial

numbers are stated on the type label of the instrument, on the inside

of the housing as well as on the delivery note.

When loading on site, rst of all the order data must be downloaded

from the Internet (see operating instructions manual "Electronics

module").

9.6 Software update

The following components are required to update the sensor soft-

ware:

•

Sensor

•

Voltage supply

•

Interface adapter VEGACONNECT 4

•

PC with PACTware

•

Current sensor software as le

You can nd the actual sensor software as well as detailed infor-

mation of the procedure under "www.vega.com/downloads" and

"Software".

Caution:

Instruments with approvals can be bound to certain software ver-

sions. Therefore make sure that the approval remains eective with a

software update.

You can nd detailed information on www.vega.com/downloads and

"Approvals".

9.7 How to proceed in case of repair

You can nd a repair form as well as detailed information on how to

proceed under www.vega.com/downloads and "Formsandcerti-

cates".

By doing this you help us carry out the repair quickly and without hav-

ing to call back for needed information.

If a repair is necessary, please proceed as follows:

•

Print and ll out one form per instrument

•

Clean the instrument and pack it damage-proof

•

Attach the completed form and, if need be, also a safety data

sheet outside on the packaging

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 67 68

Kommentare zu diesen Handbüchern

Keine Kommentare

Vega VEGAPULS 66 (≥ 2.0.0 - ≥ 4.0.0) standpipe ver. Mod Bedienungsanleitung Seite 39

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Vega VEGAPULS 66 (≥ 2.0.0 - ≥ 4.0.0) standpipe ver. Mod