Vega VEGACOM 557 Profibus FMS Bedienungsanleitung PDF herunterladen (Seite 14)

14 VEGACOM 557 Profibus FMS

Mounting and electrical connection

Mounting instructions for VEGACOM

557AP

The two modules connected to the back-

panel print consist of:

- two multipoint connectors acc. to

DIN 41 612, series F, 48-pole (d, b, z)

connected via the back-panel print

- four screws

- four coded pins

- four guide rails

Coding

The coding should be carried out for both

modules as described in chapter "2.1 Mount-

ing in carrier and housing". The coded pin c3

will not be inserted.

Module position

BGT LOG 571

The location of the module can be selected at

will, the VEGALOG 571 processing system

adapts automatically through autoconfigura-

tion during the first booting.

After autoconfiguration, the slot location of the

cards must never be changed.

BGT 596

The location of the module can be selected at

will. Please note that the two connected mod-

ules cover a width of 10 TE (5 TE for

VEGACOM 557 plus 5 TE for the adapter

board VEGACOM 557AP).

Connection VEGACOM 557AP

BGT LOG 571

By means of the bus board (part of the car-

rier BGT LOG 571), connection to LOGBUS

is automatically made when inserting

VEGACOM 557.

The voltage supply of the card must be pro-

vided separately. For this reason, a 2-pole

terminal with tension spring connection,

called U

b,

is available on the back-panel

print. The permissible operating voltage of

VEGACOM 557 should be observed. In case

of DC voltage supply, the correct polarity

should be noted!

BGT 596

When operating VEGACOM 557 as

DISBUS participant, the DISBUS must be

wired in addition to the supply voltage.

For the two cables of the DISBUS, a 2-pole

terminal with tension spring connection is

available. Make sure that the polarity is cor-

rect!

Pin assignments VEGACOM 557AP

Pin-no.

RS 485

1

2

-

3

DATA (RxD/TxD-P)

4

-

-

5

GND (DGND)

6

7

8

-

/DATA (RxD/TxD-N)

9

-

-

9-pole SUB-D plug

Pin-no.

RS 485

1

2

-

3

DATA (RxD/TxD-P)

4

-

-

5

GND (DGND)

6

7

8

-

/DATA (RxD/TxD-N)

9

-

-

9-pole SUB-D socket

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare