Vega MINITRAC 31 4 … 20 mA_HART - four-wire Bedienungsanleitung PDF herunterladen (Seite 28)

6 Set up with the display and adjustment module

MINITRAC 31 • 4 … 20 mA/HART - four-wire

40447-EN-131119

6 Set up with the display and adjustment

module

6.1 Insert display and adjustment module

The display and adjustment module can be inserted into the sensor

and removed again at any time. It is not necessary to interrupt the

power supply.

Proceed as follows:

1. Unscrew the small housing cover

2. Place the display and adjustment module in the desired position

ontheelectronics(youcanchooseanyoneoffourdierentposi-

tions - each displaced by 90°)

3. Press the display and adjustment module onto the electronics

and turn it to the right until it snaps in.

4. Screw housing cover with inspection window tightly back on

Removal is carried out in reverse order.

The display and adjustment module is powered by the sensor, an ad-

ditional connection is not necessary.

Fig. 18: Insert display and adjustment module

Note:

Ifyouintendtoretrottheinstrumentwithadisplayandadjustment

module for continuous measured value indication, a higher cover with

an inspection glass is required.

Mount/Dismount display

and adjustment module

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 87 88

Keine Kommentare

Vega MINITRAC 31 4 … 20 mA_HART - four-wire Bedienungsanleitung Seite 28