Vega MINITRAC 31 Profibus PA Bedienungsanleitung PDF herunterladen (Seite 49)

6 Set up with the display and adjustment module

MINITRAC 31 • Probus PA

43836-EN-131119

Pulse rate of the sensor

Process value

Switching function of the relay

Information:

The simulation is automatically terminated 10 minutes after the last

pressing of a key.

Additional adjustments

In this menu item, the PIN is permanently activated/deactivated. Thus

you protect the sensor data against unauthorized access and unin-

tended changes. The default setting of the PIN is 0000.

This parameter is described in the operating instructions manual

"Display and adjustment module".

In this menu item you can set the actual date and time.

This parameter is described in the operating instructions manual

"Display and adjustment module".

When a reset is carried out, all settings (with only a few exceptions)

are reset. The exceptions are: PIN, language, SIL and HART mode.

The following reset functions are available:

Basic settings: Resetting of the parameter adjustments to default

values at the time of shipment. Order-specic settings are deleted.

Default settings: Resetting of the parameter adjustment like under

"Basic settings". In addition, special parameters are reset to default

values. Order-specic settings are deleted.

Peak values of measured value: Resetting of the parameter adjust-

ments in the menu item "Setup" to the default values of the respective

instrument. Order-specic settings remain but are not taken over into

the current parameters.

Additional settings - PIN

Additional adjustments -

Date Time

Additional adjustments

- Reset

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 95 96

Keine Kommentare

Vega MINITRAC 31 Profibus PA Bedienungsanleitung Seite 49