Vega MINITRAC 31 Profibus PA Bedienungsanleitung PDF herunterladen (Seite 56)

6 Set up with the display and adjustment module

MINITRAC 31 • Probus PA

43836-EN-131119

This menu item appears only if you have selected under adjustment

mode (setup/adjustment mode) the "Two-point adjustment".

In this menu item you can set the max. pulse rate (ct/s) at which the

sensor should switch over.

Empty the vessel until the MINITRAC 31 is uncovered.

You thus get the max. pulse rate (ct/s) for the "uncovered" adjustment.

Enter the requested pulse rate manually or let the rate be determined

by MINITRAC 31. Automatic determination of the pulse rate should be

given preference.

You can enter the adjustment point (ct/s) manually.

You can let the adjustment point be determined by MINITRAC 31.

Since the adjustment is very comprehensive, the menu points of

Function Blocks 1 (FB1) were put together in a submenu.

In menu item"Channel" you determine which measured value the

output refers to.

In menu item "Scaling unit" you dene the scaling variable and the

scaling unit for the pulse rate on the display, e.g. volume in percent.

Adjustment "uncovered"

(two-point adjustment)

Setup - AI FB1

Setup - AI FB1 - Channel

Setup - AI FB1 - Scaling

unit

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 95 96

Keine Kommentare

Vega MINITRAC 31 Profibus PA Bedienungsanleitung Seite 56