Vega VEGABAR 66 Foundation Fieldbus Bedienungsanleitung PDF herunterladen (Seite 48)

8Maintenanceandfaultrectication

VEGABAR 66 • Foundation Fieldbus

36740-EN-130321

8.4 Exchanging the electronics module

In case of a defect, the electronics module can be exchanged by the

user against an identical type. If no electronics module is available on

side, the module can be ordered from the agency serving you.

Ordering and exchange are possible with or without sensor serial

number. The electronics module with serial number includes order-

specic data such as factory setting, seal material etc. These are not

included in the electronics module without serial number.

The serial number is stated on the type label of VEGABAR 66 or on

the delivery note.

8.5 Software update

The software version of VEGABAR 66 can be determined as follows:

•

on the type label of the electronics

•

Via the display and adjustment module

•

via PACTware

You can view all software histories on our website www.vega.com.

Make use of this advantage and get registered for update information

via e-mail.

The following components are required to update the sensor soft-

ware:

•

Sensor

•

Voltage supply

•

VEGACONNECT

•

PC with PACTware

•

Currentsensorsoftwareasle

At"www.vega.com/downloads"goto"Software".Selectunder"plics

sensors and instruments

","Firmware updates"therespectiveinstru-

mentseriesandsoftwareversion.Loadthezipleviatherightmouse

keywith"Save target as"e.g.onthedesktopofyourPC.Movewith

therightmousekeytothefolderandselect"Extract all".Savethe

extractedles,forexampleonthedesktop.

Connect the signal conditioning instrument to power supply and

provide the connection from the PC to the instrument via the interface

adapter.StartPACTwareandgoviathemenu"Project"totheVEGA

project assistant.Select"USB"and"Set instruments online".Activate

theprojectassistantwith"Start".Theassistantestablishesthecon-

nection automatically and opens the parameter adjustment window

"Sensor # online parameter adjustment".Connectthisparameter

adjustment window before you carry out further steps.

Select with the right mouse key the sensor in the project and go to

"Additional function

".Thenclickto"Software update".Thewindow

"Sensor # software update"opens.PACTwarechecksnowthesensor

data and displays the actual hardware and software version of the

sensor. This takes approximately 60 s.

Load sensor software

to PC

Prepare update

Load software into sen-

sor

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 71 72

Kommentare zu diesen Handbüchern

Keine Kommentare

Vega VEGABAR 66 Foundation Fieldbus Bedienungsanleitung Seite 48

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Vega VEGABAR 66 Foundation Fieldbus