Vega D90 Profibus PA Bedienungsanleitung PDF herunterladen (Seite 25)

Pressure transmitter D90 (Profibus PA) 25

In the window "Modify meas. loop configura-

tion" you can assign a name and a descrip-

tion to the measurement loop. State under

"Application" if you want to set up a process

pressure or level measurement. With OK you

return again to the window "VEGA Visual

Operating". In the following explanations, we

assume that you have chosen the application

"Level measurement". The adjustment "Proc-

ess pressure measurement" differs only

slightly from the following presentation.

Setup

Sensor parameter setting – Adjustment

Click to Instrument data, then to Parameter

adjustment.

Choose the measurement loop in which you

want to make the parameter adjustment and

click to OK.

From the window "Instrument data parameter

adjustment" you reach all submenus of the

sensor. To get familiar with the available op-

tions, try out the buttons one after the other.

You will always return to this window. To carry

out the adjustment, click the button Adjust-

ment.

Click in the window "Adjustment" to Min/Max

adjustment.

Then, in the window "Min/Max adjustment",

you have to choose the type of adjustment. If

you want to carry out the "Adjustment without

taking the actual product into account" (dry

adjustment), click to no, then to OK.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 35 36

Keine Kommentare

Vega D90 Profibus PA Bedienungsanleitung Seite 25