Vega FIBERTRAC 31 Profibus PA Bedienungsanleitung PDF herunterladen (Seite 30)

6 Set up with the display and adjustment module

FIBERTRAC 31 • Probus PA

43833-EN-131119

Information:

In this operating instructions manual, the instrument-specic param-

eters are described. Further general parameters are described in the

operating instructions manual "Display and adjustment module".

Caution:

During the rst setup or after an instrument reset the instrument starts

with preset standard values. These value are not suitable for your ap-

plication and must be replaced by real values.

Carry out a setup in the sequence described in the following.

The main menu is divided into ve sections with the following func-

tions:

Setup: Settings, e.g. for measurement loop name, isotope, applica-

tion, background radiation, adjustment, signal output

Display: Settings, for example language, measured value display

Diagnosis: Information, for example, of device status, peak value,

simulation

Additional adjustments: Instrument unit, reset, date/time, copying

function

Info: Instrument name, hardware and software version, date of manu-

facture, instrument features

Check if the correct language is already set for the display. If not, you

can change the language in the menu item "Display/Language".

Start with the setup of FIBERTRAC 31.

In the main menu point "Setup", the individual submenu points

should be selected one after the other and provided with the correct

parameters to ensure optimum adjustment of the measurement. The

procedure is described in the following.

Stick with the normal sequence of the menu items as closely as pos-

sible.

Setup

An address must be assigned to each Probus PA instrument. Each

address may only be assigned once in the Probus PA network. The

sensor is only recognized by the control system if the address is set

correctly.

When the instrument is shipped, address 126 is adjusted. This ad-

dress can be used for function test of the instrument and for con-

Instrument start

Main menu

Procedure

Setup - Sensor address

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 87 88

Kommentare zu diesen Handbüchern

Keine Kommentare

Vega FIBERTRAC 31 Profibus PA Bedienungsanleitung Seite 30

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Vega FIBERTRAC 31 Profibus PA