Vega POINTRAC 31 Foundation Fieldbus Bedienungsanleitung PDF herunterladen (Seite 31)

6 Set up with the display and adjustment module

POINTRAC 31 • Foundation Fieldbus

41779-EN-131119

•

Date of manufacture - shows calibration date and the date of the

last change

•

Device ID - shows the device ID and the sensor TAG (PD_TAG)

•

Instrument features - shows further instrument features

These parameters are described in the operating instructions manual

"Display and adjustment module".

6.4 Saving the parameter adjustment data

We recommended noting the adjusted data, e.g. in this operating

instructions manual, and archiving them afterwards. They are thus

available for multiple use or service purposes.

If the instrument is equipped with a display and adjustment module,

the data in the sensor can be saved in the display and adjustment

module. The procedure is described in the operating instructions

manual "Display and adjustment module" in the menu item "Copy

sensor data". The data remain there permanently even if the sensor

power supply fails.

The following data or settings for adjustment of the display and ad-

justment module are saved:

•

All data of the menu "Setup" and "Display"

•

In the menu "Additional adjustments" the items "Sensor-specic

units, temperature unit and linearization"

•

Thevaluesoftheuserprogrammablelinearizationcurve

The function can also be used to transfer settings from one instru-

ment to another instrument of the same type. If it is necessary to

exchange a sensor, the display and adjustment module is inserted

into the replacement instrument and the data are likewise written into

the sensor via the menu item "Copy sensor data".

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 59 60

Keine Kommentare

Vega POINTRAC 31 Foundation Fieldbus Bedienungsanleitung Seite 31