44
11 Supplement
POINTRAC 31 • Foundation Fieldbus
41779-EN-131119
Ʋ Max. 253VAC,253VDC
Switching current
Ʋ Min. 10 µA
Ʋ Max. 3 A AC, 1 A DC
Breaking capacity
Ʋ Min. 50 mW
Ʋ Max. 750VAAC,40WDC
If inductive loads or stronger currents are switched
through, the gold plating on the relay contact surface will
be permanently damaged. The contact is then no longer
suitable for switching low-level signal circuits.
Contact material (relay contacts) AgNi or AgSnO and Au plated
Transistor output
Output Floating transistor output, permanently shortcircuit-proof
Load current < 400 mA
Voltageloss <1V
Switching voltage <55VDC
Blocking current < 10 µA
Accuracy (according to DIN EN 60770-1)
Process reference conditions according to DIN EN 61298-1
Ʋ Temperature +18…+30°C(+64…+86°F)
Ʋ Relative humidity 45 … 75 %
Ʋ Air pressure 860 … 1060 mbar/86 … 106 kPa (12.5 … 15.4 psig)
Repeatability ≤0.5%
Deviation with bulk solids The values depend to a great extent on the application.
Bindingspecicationsarethusnotpossible.
DeviationunderEMCinuence ≤1%
Ambient conditions
Ambient, storage and transport tempera-
ture
-40…+60°C(-40…+140°F)
Process conditions
Fortheprocessconditions,pleasealsonotethespecicationsonthetypelabel.Thelowervalue
always applies.
Process pressure Unpressurized
Process temperature (measured on the
detector tube)
-40…+60°C(-40…+140°F)
Withtemperaturesofmorethan60°Cwerecommend
the use of water cooling
Vibrationresistance
3)
mechanical vibrations up to 1 g in the frequency range
5…200Hz
3)
Tested according to the guidelines of German Lloyd, GL directive 2.
Kommentare zu diesen Handbüchern