1 Loosen the screw in the cover of the plug connector
2 Open the
cover and remove it
3 Press the plug insert downwards
4 Loosen the screws of the strain relief and cable entry
Fig. 5: Loosen the plug
insert
1 Plug insert
2 Strain relief
3 Cable gland
4 Plug housing
5 Remove approx. 5 cm of the cable mantle, strip approx. 1 cm
insulation from the individual wires
6 Lead the cable through the cable gland into the plug housing
7 Connect the wire ends to the screw terminals according to the
wiring plan
Fig. 6: Connection to the
screw terminals
1 Cable gland
2 Cover
3 Plug housing
4 Plug insert
5 Plug seal
VEGABAR 17 15
5 Connecting to power supply
27636-EN-120531
Kommentare zu diesen Handbüchern