Vega VEGABAR 40 Profibus PA Bedienungsanleitung PDF herunterladen (Seite 22)

22 VEGABAR 40 (Profibus PA)

Setup

Information about the sensor ident

number:

You do not have to modify the adjustment

"VEGA specific No.“. Only if you want to

make sure that VEGABAR can be replaced

on the Profibus by a sensor of another manu-

facturer, do you have to choose the option

"Profile specific No.“.

Configuration measurement loop

Click to Configuration, point to Measure-

ment loop, then click to Modify.

Now all instruments which are connected to

the bus are shown (identifiable by the bus

address and the serial number). Note that in

this example the same serial number ap-

pears twice. This is a sensor with a measure-

ment loop for pressure and a second meas-

urement loop for temperature. Choose the

sensor (the measurement loop) with which

you want to create a measurement loop and

click to OK.

In the window "Modify meas. loop configura-

tion“ you can assign a name and a descrip-

tion to the measurement loop. State under

"Application“ if you want to create a process

pressure or level measurement. With OK you

return again to the window "VEGA Visual

Operating“. In the following explanations, we

assume that you have chosen the application

"Process pressure measurement“. The ad-

justment with "Level measurement“ differs

slightly from the following presentation.

The menu language of the sensor can be

selected (only relevant with a sensor with

menu-driven adjustment) and the units for the

output of the sensor values can be set. If

address 126 is adjusted on the sensor, you

can assign a bus address to the sensor in

the field "Sensor address“. Then click to

Save.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare