Vega VEGABAR 40 Profibus PA Bedienungsanleitung PDF herunterladen (Seite 24)

24 VEGABAR 40 (Profibus PA)

Click in the window "Conditioning“ to Lineari-

sation.

In the window "Span“ you first choose in

which unit the adjustment should be carried

out (mbar, psi, kPa). Enter if you want to edit

the percentage or the current value. If you

want to edit the percentage value, enter the

value (e.g. 80 %). Then click to Save. The

span adjustment is finished.

Sensor parameter adjustment – Lin-

earisation curves

Click in the window "Instrument data param-

eter adjustment“ to Conditioning.

In the window "Zero adjustment“ you choose

in which unit the adjustment should be car-

ried out (mbar, psi, kPa). Then click to Save.

The Zero adjustment is finished.

Setup

Click to Zero or Span to carry out the re-

spective adjustment.

Note:

The vessel or the cable must be unpressu-

rised for the zero adjustment! For the span

adjustment, it should be possible to generate

a defined pressure (e.g. 80 %) in the vessel

or on the cable.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

Keine Kommentare

Vega VEGABAR 40 Profibus PA Bedienungsanleitung Seite 24