Vega VEGABAR 67 Foundation Fieldbus Bedienungsanleitung PDF herunterladen (Seite 22)

5 Connecting to power supply

VEGABAR 67 • Foundation Fieldbus

36744-EN-130321

Fig. 12: Connection steps 6 and 7

Proceed as follows:

1. Loosen the four screws on the housing base with an Allen key

size4

2. Remove the mounting plate from the housing socket

Fig. 13: Components of the external housing

1 Screws

2 Wall mounting plate

3 Cable gland

3. Loop the connection cable through the cable entry on the housing

base

IP 68 version with exter-

nal housing

The connection cable is already preconfectioned. If necessary, shorten it

to the requested length, cut the breather capillaries clean. Remove approx.

5 cm of the cable mantle, strip approx. 1 cm insulation from the ends of the

individual wires. After shortening the cable, fasten the type plate with support

back onto the cable.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 71 72

Keine Kommentare

Vega VEGABAR 67 Foundation Fieldbus Bedienungsanleitung Seite 22