Vega FIBERTRAC 31 4 … 20 mA_HART - four-wire With SIL q Bedienungsanleitung PDF herunterladen (Seite 42)

7 Set up with the display and adjustment module

FIBERTRAC 31 • 4 … 20 mA/HART - four-wire

43386-EN-131119

Additional adjustments

In this menu item, the PIN is permanently activated/deactivated. Thus

you protect the sensor data against unauthorized access and unin-

tended changes. The default setting of the PIN is 0000.

This parameter is described in the operating instructions manual

"Display and adjustment module".

In this menu item you can set the actual date and time.

This parameter is described in the operating instructions manual

"Display and adjustment module".

When a reset is carried out, all settings (with only a few exceptions)

are reset. The exceptions are: PIN, language, SIL and HART mode.

The following reset functions are available:

Basic settings: Resetting of the parameter adjustments to default

valuesatthetimeofshipment.Order-specicsettingsaredeleted.

Default settings: Resetting of the parameter adjustment like under

"Basic settings". In addition, special parameters are reset to default

values.Order-specicsettingsaredeleted.

Peak values of measured value: Resetting of the parameter adjust-

ments in the menu item "Setup" to the default values of the respective

instrument.Order-specicsettingsremainbutarenottakenoverinto

the current parameters.

Peak values of temperature: Resetting of the measured min. and

max. temperatures to the actual measured value.

The following table shows the default values of the instrument. The

values apply for the application "Level". First of all you have to select

the application.

Depending on the instrument version, not all menu items may be

availableortheymaybedierentlyassigned:

Additional settings - PIN

Additional adjustments -

Date Time

Additional adjustments/

Reset

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 87 88

Keine Kommentare

Vega FIBERTRAC 31 4 … 20 mA_HART - four-wire With SIL q Bedienungsanleitung Seite 42