12
4 Mounting
PLICSRADIO R61 • Wireless receiving unit (single channel)
32625-EN-130228
Eectiverange Mounting height 2.4 GHz Mounting height 920 MHz
500 m (1640 ft) 3.9 m (12.79 ft) 6.4 m (20.99 ft)
750 m (2460 ft) 4.8 m (15.74 ft) 7.8 m (25.59 ft)
1000 m (3280 ft) 5.6 m (18.37 ft) 9.1 m (29.85 ft)
1500 m (4921 ft) - 11 m (36.08 ft)
Mount PLICSRADIO at the minimum height from the ground, or from
thehighestobstaclethattouchestheFresnelzone,asindicatedin
thetable;useamastifnecessary.Withthe2.4GHzstandardmodel,
an optional external antenna with a 3 meter cable is available to allow
mounting at the required height.
Use the recommended cables (see chapter "Connecting to power
supply") and tighten the cable gland.
You can give your instrument additional protection against moisture
penetration by leading the connection cable downward in front of the
cableentry.Rainandcondensationwatercanthusdraino.Thisap-
plies mainly to outdoor mounting as well as installation in areas where
high humidity is expected (e.g. through cleaning processes) or on
cooled or heated vessels.
Fig. 5: Measures against moisture penetration
4.2 Mounting preparations
The following tools are required for mounting:
•
Allenwrenchsize4
•
Phillipsheadsize2orTo rx sizeT10
•
Slotted screwdriver 3 mm
4.3 Mounting steps
1. Mark the holes according to the following drilling template
2. Depending on the mounting surface, fasten the wall mounting
plate with 4 screws
Moisture
Tools
Wall mounting
Kommentare zu diesen Handbüchern