Vega VEGABAR 67 4 … 20 mA_HART Bedienungsanleitung PDF herunterladen (Seite 36)

6 Set up with the display and adjustment module PLICSCOM

VEGABAR 67 • 4 ... 20 mA/HART

36742-EN-130321

4. Set the requested mbar value with [+] and [->].

5. Conrmwith[+] and move to max. adjustment with [->].

Themin.adjustmentisnished.

Information:

Foranadjustmentwithlling,simplyentertheactualmeasuredvalue

indicated at the bottom of the display.

Iftheadjustmentrangesareexceeded,themessage"Outside param-

eter limits"appears.Theeditingprocedurecanbeabortedwith[ESC]

or the displayed limit value can be accepted with [OK].

Proceed as follows:

1. Editthe%valueinthemenuitem"Max. adjustment"with[OK].

Max. adjustment

+100.0 %

+1000.0 mbar

0000.0 mbar

Information:

The displayed pressure for 100 % corresponds to the nominal meas-

uring range of the sensor (in the above example 1 bar = 1000 mbar).

2. Set the requested percentage value with [->] and [OK].

3. Conrmwith[OK] and edit the requested mbar value.

4. Set the requested mbar value with [+] and [->].

5. Conrmwith[OK] and move to the menu overview with [ESC].

Themax.adjustmentisnished.

Information:

Foranadjustmentwithlling,simplyentertheactualmeasuredvalue

indicated at the bottom of the display.

Iftheadjustmentrangesareexceeded,themessage"Outside param-

eter limits

"appears.Theeditingprocedurecanbeabortedwith[ESC]

or the displayed limit value can be accepted with [OK].

Process pressure measurement

Set up VEGABAR 67 in the following sequence:

1. Selectapplication"Processpressuremeasurement"

2. Select the unit of measurement

3. Carry out a position correction

4. Carryingoutzeroadjustment

5. Carry out span adjustment

Inthemenuitem"Adjustment unit"youselectthephysicalunitin

which the adjustment should be carried out, e.g. mbar, bar, psi…

Thepositioncorrectioncompensatestheinuenceofthemounting

positionorstaticpressureonthemeasurement.Itdoesnotinuence

the adjustment values.

Carry out max. adjust-

ment

Parameter adjustment

"Process pressure meas-

urement"

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 71 72

Kommentare zu diesen Handbüchern

Keine Kommentare

Vega VEGABAR 67 4 … 20 mA_HART Bedienungsanleitung Seite 36

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Vega VEGABAR 67 4 … 20 mA_HART