Vega VEGABAR 81 4 … 20 mA_HART - Operating Instructions Bedienungsanleitung PDF herunterladen (Seite 11)

3 Product description

VEGABAR 81 • 4 … 20 mA/HART

45018-EN-131010

For sensors with double chamber housing the interface adapter "DIS-

ADAPT" is also required for VEGADIS 81.

Youcanndfurtherinformationintheoperatinginstructions"VE-

GADIS 81" (Document-ID 43814).

The adapter "DIS-ADAPT" is an accessory part for sensors with

double chamber housings. It enables the connection of VEGADIS 81

to the sensor housing via an M12 x 1 plug.

Youcanndfurtherinformationinthesupplementaryinstructions

"Adapter DISADAPT" (Document-ID 45250).

VEGADIS 62 is suitable for measured value indication and adjustment

of sensors with HART protocol. It is looped into the 4 … 20 mA/HART

signal cable.

Youcanndfurtherinformationintheoperatinginstructions"VE-

GADIS 62" (Document-ID 36469).

The PLICSMOBILE T61 is an external GSM/GPRS radio unit for

transmission of measured values and for remote parameter adjust-

ment of plics

sensors. The adjustment is carried out via PACTware/

DTM by using the integrated USB connection.

Youcanndfurtherinformationinthesupplementaryinstructions

"PLICSMOBILE T61" (Document-ID 37700).

The PLICSMOBILE is an internal GSM/GPRS radio unit for transmis-

sion of measured values and for remote parameter adjustment of

plics

sensors. The adjustment is carried out via PACTware/DTM by

using the integrated USB connection.

Youcanndfurtherinformationinthesupplementaryinstructions

"PLICSMOBILE GSM/GPRS radio module" (Document-ID 36849).

The protective cover protects the sensor housing against soiling and

intense heat from solar radiation.

Youwillndadditionalinformationinthesupplementaryinstructions

manual "Protective cover" (Document-ID 34296).

Screwedangesareavailableindierentversionsaccordingtothe

following standards: DIN 2501, EN 1092-1, BS 10, ANSI B 16.5,

JIS B 2210-1984, GOST 12821-80.

Youcanndadditionalinformationinthesupplementaryinstructions

manual "Flanges according to DIN-EN-ASME-JIS" (Document-ID

31088).

Welded sockets are used to connect the sensors to the process.

Youcanndfurtherinformationinthesupplementaryinstructions

"Welded socket VEGABAR series 80" (Document-ID 45082).

The electronics module VEGABAR series 80 is a replacement part

forpressuretransmittersofVEGABARseries80.Thereisadierent

version available for each type of signal output.

DIS-ADAPT

VEGADIS 62

PLICSMOBILE T61

PLICSMOBILE

Protective cap

Flanges

Welded socket

Electronics module

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 83 84

Kommentare zu diesen Handbüchern

Keine Kommentare

Vega VEGABAR 81 4 … 20 mA_HART - Operating Instructions Bedienungsanleitung Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Vega VEGABAR 81 4 … 20 mA_HART - Operating Instructions