Vega VEGABAR 81 4 … 20 mA_HART - Operating Instructions Bedienungsanleitung Seite 33

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 84
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 32
33
6 Set up with the display and adjustment module
VEGABAR 81 • 4 … 20 mA/HART
45018-EN-131010
Save value
[->] key:
Presentation, change measured value
Select list entry
Select editing position
[+] key:
Change value of the parameter
[ESC] key:
Interrupt input
Jump to next higher menu
The sensor is adjusted via the four keys of the display and adjust-
ment module. The LC display indicates the individual menu items. The
functions of the individual keys are shown in the above illustration.
Approx. 60 minutes after the last pressing of a key, an automatic reset
tomeasuredvalueindicationistriggered.Anyvaluesnotconrmed
with [OK] will not be saved.
6.3 Parameter adjustment - Quick setup
To quickly and easily adapt the sensor to the application, select
the menu item "Quick setup" in the start graphic on the display and
adjustment module.
Carry out the following steps in the below sequence.
Youcannd"Extended adjustment" in the next sub-chapter.
1. Measurement loop name
Intherstmenuitemyouassignasuitablemeasurementloopname.
Permitted are names with max. 19 characters.
2. Application
In this menu item you activate/deactivate the slave for the electronic
dierentialpressureandselecttheapplication.Withprocesspressure
transmitters, the selection comprises process pressure and level
measurement; with suspension pressure transmitters it comprises
level measurement.
3. Units
In this menu item you determine the adjustment and temperature
units of the instrument. Depending on the selected application in the
menu item "Application",dierentadjustmentunitsareavailable.
Adjustment system
Presettings
Seitenansicht 32
1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 83 84

Kommentare zu diesen Handbüchern

Keine Kommentare