Vega VEGABAR 81 HART and accumulator pack - Operating I Bedienungsanleitung Seite 53

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 68
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 52
53
11 Supplement
VEGABAR 81 • HART and accumulator pack
45026-EN-131107
Deviation (according to IEC 60770)
Applies to the digitalsignaloutput(HART,ProbusPA,FoundationFieldbus)aswellastothe
analogue current output 4 … 20 mA and refers to the set span. Turn down (TD) is the ratio nominal
measuring range/set span.
Accuracy class Non-linearity, hysteresis and re-
peatability with TD 1 : 1 up to 5 : 1
Non-linearity, hysteresis and re-
peatability with 5 : 1
0.2 % < 0.2 % < 0.04 % x TD
Inuenceoftheproductorambienttemperature
Thermal change zero signal and output span
Applies to the digitalsignaloutput(HART,ProbusPA,FoundationFieldbus)aswellastothe
analogue current output 4 … 20 mA and refers to the set span. Turn down (TD) is the ratio nominal
measuring range/set span.
Averagetemperaturecoecient,
zero signal
In the compensated tem-
perature range 10 … +70 °C
(+50 … +158 °F)
Outside the compensated tem-
perature range
Turn down 1 : 1 < 0.05 %/10 K typ. < 0.05 %/10 K
Turn down 1 : 1 up to 5 : 1 < 0.1 %/10 K -
Turn down up to 10 : 1 < 0.15 %/10 K -
Thermal change, current output
Applies also to the analogue 4 … 20 mA current output and refers to the set span.
Thermal change, current output < 0.05 %/10 K, max. < 0.15 %, each with -40 … +80 °C
(-40 … +176 °F)
0,15 %
-0,15 %
-40°C -20°C
20°C
40°C 60°C 80°C
Fig. 21: Thermal change, current output
Additionaltemperatureinuencethroughchemicalseal
Thespecicationsrefertodiaphragmmaterial316Laswellasisolatingliquidsiliconeoil.Theyare
only used for estimation. The actual values depend on the diameter, material and strength of the
diaphragm as well as the isolating liquid. They are available on request.
Temperaturecoecientofthechemicalsealinmbar/10Kwith
Ʋ Flange DN 50 PN 40, Form C,
DIN 2501
1.2 mbar/10 K
Seitenansicht 52
1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 67 68

Kommentare zu diesen Handbüchern

Keine Kommentare