Vega MINITRAC 31 Profibus PA Bedienungsanleitung PDF herunterladen (Seite 60)

6 Set up with the display and adjustment module

MINITRAC 31 • Probus PA

43836-EN-131119

The following reset functions are available:

Basic settings: Resetting of the parameter adjustments to default

values at the time of shipment. Order-specic settings are deleted.

Default settings: Resetting of the parameter adjustment like under

"Basic settings". In addition, special parameters are reset to default

values. Order-specic settings are deleted.

Peak values of measured value: Resetting of the parameter adjust-

ments in the menu item "Setup" to the default values of the respective

instrument. Order-specic settings remain but are not taken over into

the current parameters.

Peak values of temperature: Resetting of the measured min. and

max. temperatures to the actual measured value.

The following table shows the default values of the instrument. The

values apply for the application "Level". First of all you have to select

the application.

Depending on the instrument version, not all menu items may be

available or they may be dierently assigned:

Menu Menu item Default value

Setup Sensor address 126

Measurement loop name Sensor

Isotope Cs-137

Application Limit level

Background radiation 0 ct/s

Temperature unit ° C

Adjustment mode 1-point

Adjustment (uncovered) 90000 ct/s

Delta I 90 %

AI FB1 Channel Process value

AI FB1 scaling unit %

AI FB1 scaling 0 % = 0 %

100 % = 100 %

AI FB1 damping 0 s

Mode relay Dry run protection

Block adjustment Released

Display Language Selected language

Displayed value Pulse rate (ct/s)

With this functionAdditional adjustments -

Copy instrument settings

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 95 96

Keine Kommentare

Vega MINITRAC 31 Profibus PA Bedienungsanleitung Seite 60