14
5 Setup - Sensors up to software 3.99
PLICSCOM •
36433-EN-130228
5 Setup - Sensors up to software 3.99
5.1 Common adjustment menu for all signal
outputs
Through the parameter adjustment the instrument is adapted to the
application conditions. The parameter adjustment is carried out via an
adjustment menu.
Information:
In this operating instructions, all general parameters are described.
Additionalinstrument-specicparametersaredescribedintheoper-
ating instructions of the respective sensor.
The following presentations are available in the measured value
display:
•
Level as digital value, sensor TAG
•
Level as digital value and bar graph, sensor TAG
•
Only with pressure transmitters: Level or pressure as digital value,
temperature value
With [->]youselectdierentpresentationsofthemeasuredvalue.
From each of these presentations, you can reach with [OK] the menu
overview. With [ESC] you move from the menu overview again to the
measured value indication.
Themainmenuisdividedintovesectionswiththefollowingfunc-
tions:
▶
Basic adjustment
Display
Diagnostics
Service
Info
To dampprocess-dependentmeasuredvalueuctuations,setan
integration time of 0 … 999 s in this menu item.
Depending on the sensor type, the factory setting is 0 s or 1 s.
Damping
0 s
Inthismenuitemyouselectthelinearizationcurve:
•
Linear
•
Horizontalcylindricaltank
•
Spherical tank
•
User programmable
Userprogrammablemeans:Switchingonalinearizationcurvepro-
grammed via PC and PACTware
Alinearizationisnecessaryforallvesselsinwhichthevesselvolume
doesnotincreaselinearlywiththelevel-e.g.horizontalcylindri-
Measured value indica-
tion
Main menu
Basic adjustment/Damp-
ing
Basic adjustment/Lineari-
zation curve
Kommentare zu diesen Handbüchern