Vega LUCOM EDGE router ER75i v2 SL USER’S GUIDE Bedienungsanleitung PDF herunterladen (Seite 39)

CONFIGURATION

6.7. LAN Configuration

To enter the network configuration, select the LAN menu item. In the first part

of the window it is possible to define the network interface IP address

(IP address), the network mask (Subnet Mask) and media type (Media Type), in the majority

of cases set Auto-Negotiation. ETH network set in Primary LAN configuration, expansion ETH

PORT set in Secondary LAN configuration.

In the second part of the window is possible to define Default Gateway and DNS

server.

In the third part of the window, it is possible to define the DHCP server by checking

the Enable dynamic DHCP server option. In the window it is possible to define the beginning

(IP Pool Start) and end (IP Pool End) of the pool of IP addresses which will lease to DHCP

clients. By parameter Lease time is possible to define time after which the client can use IP

address.

In the fourth part of the Windows it is possible, by checking the Enable static

DHCP server option, to define leases up to six static IP Addresses, which conform to MAC

Address of the connected equipment etc.

The changes in settings will apply after pressing the Apply button.

The DHCP server assign IP addresses to the connected clients from defined address

pool, IP address of the gate and IP address of the primary DNS server. It is important not

to overlap ranges of static engaged IP address with address allotted by the help of DHCP,

or collision of addresses may occur, thereby malfunctioning the network.

LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 100 101

Keine Kommentare

Vega LUCOM EDGE router ER75i v2 SL USER’S GUIDE Bedienungsanleitung Seite 39